"cazzyodo" (cazzyodo)
10/04/2018 at 13:57 • Filed to: None
1
17|
"cazzyodo" (cazzyodo)
10/04/2018 at 13:57 • Filed to: None | 1
| 17 |
I feel like I need to share this while I track down a video. !!!error: Indecipherable SUB-paragraph formatting!!! but also was on !!!error: Indecipherable SUB-paragraph formatting!!! .
HFV has no HFV. But somehow has 2 motorcycles
> cazzyodo
10/04/2018 at 14:02 |
|
thats awesome.
Nibby
> cazzyodo
10/04/2018 at 14:02 |
|
is it
TheRealBicycleBuck
> cazzyodo
10/04/2018 at 14:06 |
|
While it solves the biggest shortcoming of all the minitrucks, it does have two MAJOR flaws. No heat. No a/c.
Without a/c in Florida, the interior must smell like a locker room.
random001
> cazzyodo
10/04/2018 at 14:07 |
|
|
HFV has no HFV. But somehow has 2 motorcycles
> cazzyodo
10/04/2018 at 14:09 |
|
being that is in New England i decided to look for cool Volvos. i was not disappointed. I seared manual only.
turbo 240
https://providence.craigslist.org/cto/d/1984-volvo-242-turbo/6705745400.html
s60R
https://southcoast.craigslist.org/cto/d/2004-volvo-s60r-awd-6-speed/6713794335.html
P1800
https://newlondon.craigslist.org/cto/d/1972-volvo-1800p-1-owner/6679450877.html
19 56 444
https://providence.craigslist.org/cto/d/1956-volvo-444/6706509053.html
there was also 2 manual C30s
Pich, with Z32 now featuring Civic [Si] / No
> cazzyodo
10/04/2018 at 14:11 |
|
ah great, now if you put a load on the bed the truck wont move
|
Pich, with Z32 now featuring Civic [Si] / No
> random001
10/04/2018 at 14:11 |
|
must not be a fan of torque?
If only EssExTee could be so grossly incandescent
> cazzyodo
10/04/2018 at 14:18 |
|
160lb-ft at 6800rpm. Yeah, that’s a usable figure for a pickup truck.
AestheticsInMotion
> HFV has no HFV. But somehow has 2 motorcycles
10/04/2018 at 14:23 |
|
Whoever put those wheels on that R needs a savage beating
|
AestheticsInMotion
> Pich, with Z32 now featuring Civic [Si] / No
10/04/2018 at 14:23 |
|
Sure i t will, just drop the clutch at 8k
|
TheRealBicycleBuck
> If only EssExTee could be so grossly incandescent
10/04/2018 at 14:25 |
|
Here are the stock specs for m y first Mazda truck:
“ Engine displacement was 122 cubic inches. The cylinder head was an aluminum single-overhead cam. The truck produced 86 horsepower at 4,800 rpm; the torque was 120 foot-pounds at 2,800 rpm. Both the bore and stroke were 3.39 inches.”
Back then, we made do. My little truck supported at least three moves pulling a U-Haul trailer. You just had to plan ahead for the mountains.
Good times. :)
|
If only EssExTee could be so grossly incandescent
> TheRealBicycleBuck
10/04/2018 at 14:30 |
|
You must have missed the “6800rpm” part. At the same engine speed your Mazda made 120, the S2k makes about 80.
Wacko
> Nibby
10/04/2018 at 14:33 |
|
you could carry body parts at 9000 rpm...
|
TheRealBicycleBuck
> If only EssExTee could be so grossly incandescent
10/04/2018 at 14:47 |
|
I see your point. On the other hand, I’m not sure my truck could rev to 6,800 rpm. My truck didn’t come with a tach. We did everything by feel.
jasmits
> If only EssExTee could be so grossly incandescent
10/04/2018 at 15:07 |
|
This is a small RWD pickup. Normally you want low-end torque in a truck because it’s either towing or off-road focused. This is something for people that need to tote a lawn mower or other bulky equipment around on the street
|
cazzyodo
> HFV has no HFV. But somehow has 2 motorcycles
10/04/2018 at 15:41 |
|
Wait...is that 1800 a picture of a picture? From 43 years ago?
hahahahahahahaha
|
HFV has no HFV. But somehow has 2 motorcycles
> cazzyodo
10/04/2018 at 15:47 |
|
Possibly
Actually there’s a water mark in the pic so it’s probably not even the same car. And 8k is a CP on a P1800 needing a restoration